Setting up the measuring tool

Horizontal position

Vertical position
- Place the measuring tool on a stable surface in a horizontal or vertical position, mount it on the tripod or on a fastening accessory.
- Ensure that the measuring tool is stable to avoid interruptions in operation caused by re-levelling. Due to its high levelling accuracy, the measuring tool is very sensitive to knocks and vibrations and changes in position.
The alignment of the X and Y axes is marked on the housing above the rotation head. The measuring tool can be positioned according to the axes by using the alignment notches on the housing.
For horizontal operation, you can also align the measuring tool with the lower edge of the housing using the notches (5).
For vertical operation, you can align the measuring tool using the side notches (2).
- Switch the measuring tool off when aligning it using the markings above the rotation head or the side notches. Looking into the laser beam can damage your eyes.