Operation with Non-Rechargeable Batteries

It is recommended that you use alkaline manganese non-rechargeable batteries to operate the measuring tool.

  1. Press the locking mechanism (20) of the battery adapter cover and fold out the cover.
  2. Put the batteries into the battery adapter (21).
Make sure that the polarity is correct and corresponds to the diagram on the battery adapter.
Always replace all the non-rechargeable batteries at the same time. Only use non-rechargeable batteries from the same manufacturer and which have the same capacity.
  1. Close the cover of the battery adapter (21) so that it clicks into place.
The battery adapter is intended exclusively for use in Bosch measuring tools designed for this purpose.