Dust Reduction
Do not perform work without taking dust-reducing measures.
Using a suitable dust extraction attachment or a dust box/dust bag will reduce exposure to harmful dust. Provide good ventilation at the workplace. Always use suitable breathing protection. If you are using a dust box, empty it in good time and clean the filter element regularly to ensure optimal dust extraction.
Depending on the intended application, the power tool can be combined with a dust-reducing accessory together with a dust extractor see Extraction guard for cutting with a guide block.
If you are using a dust extractor, refer to the requirements listed below. The regulations on the materials being machined that apply in the country of use must be observed.
- Avoid dust accumulation at the workplace. Dust can easily ignite.
Self-Generated Dust Extraction (see figure D)
Emptying the dust box
(GWS 24-180 JZ / GWS 24-230 JZ / GWS 24-230 PZ)
Press both sides of the dust box (3) and remove the dust box (3) from the power tool. Open the cover and empty the dust box (3). Slide the dust box (3) back into the power tool until it clicks into place.