Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.
(1) | Unlocking lever for protective guard |
(2) | Spindle lock button |
(3) | On/off switch (GWS 12-125 P) |
(4) | On/off switch (GWS 12-125 S) |
(5) | Unlocking lever for on/off switch (GWS 12-125 P) |
(6) | Speed preselection thumbwheel |
(7) | Auxiliary handle (insulated gripping surface) |
(8) | Protective guard for cuttingA) |
(9) | Protective guard for grinding |
(10) | Extraction guard for grindingA) |
(11) | Mounting flange with O‑ring |
(12) | Carbide grinding headA) |
(13) | Grinding discA) |
(14) | Cutting discA) |
(15) | Quick-clamping nut with barA) |
(16) | Clamping nut |
(17) | Quick-clamping nut |
(18) | Two-pin spanner for clamping nut |
(19) | Grinding spindle |
(20) | Handle (insulated gripping surface) |
(21) | Extraction guard for cutting with cutting guidesA) |
(22) | Diamond cutting discA) |
(23) | Hand guardA) |
(24) | Cup brushA) |
(25) | Rubber sanding padA) |
(26) | Sanding sheetA) |
(27) | Round nutA) |
(28) | Diamond annular cutterA) |
(29) | Open-ended spannerA) |
- A)
This accessory is not part of the standard scope of delivery.