AssemblyBefore carrying out any work on the power tool (e.g. maintenance, tool change etc.), remove the battery from the power tool. There is risk of injury from unintentionally pressing the on/off switch.Operating and storage conditionsSuspension device (see figure X)Fitting the 180 W angle head (see figure X)Fitting the 12 V angle head (see figure X)Configuring the power toolChanging the tool at the screw head with external square (see figure X)Changing the tool at the screw head with internal hexagon (see figure X)Changing the tool at the screw head with quick-change chuck (see figure X)