Additional safety information

• Store the power tool safely when it is not in use. The storage location must be dry and lockable. This prevents the power tool from storage damage, and from being operated by untrained persons.

• Always firmly clamp the workpiece into place. Do not carry out work on workpieces that are too small to be clamped. Otherwise, the distance between your hand and the rotating cutting disc will be too small.

• Check the cable regularly and have a damaged cable repaired only by an authorised customer service agent for Bosch power tools. Replace damaged extension cables. This will ensure that the safety of the power tool is maintained.

• Never stand on the power tool. Serious injuries may occur if the power tool tips over or if you inadvertently come into contact with the saw blade.

• Always use the protective guard. The protective guard protects users from any parts that break off from the cutting disc and prevents unintentional contact with the cutting disc.

• Do not brake the cutting disc to a stop by applying side pressure after switching the power tool off. The cutting disc can be damaged, break or cause kickback.

• Never leave the tool unattended before it has come to a complete stop. Cutting tools that are still running can cause injuries.