Start-up
Position of the operator (see figure F)
- Do not stand in front of the power tool in line with the cutting disc. Always stand to the side of the cutting disc. If the cutting disc breaks, your body is more protected from possible splinters in this position.
Switching On and Off (see figure G)
- To start, press the on/off switch (2) and keep it pressed.
- Press the lock-on button (1) to lock the on/off switch (2) in this position.
- To switch off, release the on/off switch (2). If the on/off switch is locked, press it all the way in until the switch lock is released and then release the on/off switch.